Cutting Tools for Aerospace & Aviation Manufacturing
Tooling that keeps up with aerospace tolerances.
From turbine-blade fir-tree roots to titanium structural pocketing, JIAYI carbide tools are ground for the alloys and geometries aerospace work demands — Inconel 718, Waspaloy, Ti-6Al-4V.
The challenge
Aerospace parts concentrate risk: expensive forgings, long cycle times, and zero tolerance for scrap. Nickel-based superalloys work-harden and punish unstable edges; titanium thin-wall structures chatter if the tool isn't rigid. Every pass has to be predictable — there is no "second try" on a turbine disc.
JIAYI solutions for aerospace
Fir-Tree Milling Cutters
Profile-ground form cutters for turbine blade and disc fir-tree roots. Custom profiles ground to your blade-print geometry.
Titanium Pocketing End Mills
Solid carbide end mills with geometries for high-metal-removal roughing and stable finishing of Ti-6Al-4V airframe structures.
Deep-Hole Drills
For landing-gear actuator bores and deep hydraulic passages in structural components.
Custom Form Tools
Reamers and step tools ground to print for one-pass finishing of critical diameters.
Typical parts & materials
- Turbine blades & discsInconel 718, Waspaloy
- Airframe ribs, spars, bulkheadsTi-6Al-4V, aluminum alloys
- Landing-gear actuators & engine casingshigh-strength steels, superalloys
- Hydraulic actuator housingsstainless steels
Why JIAYI for aerospace
- 01
Custom profiles ground to your drawing — no catalog compromise on fir-tree or form geometries.
- 02
Carbide grades selected for superalloy and titanium cutting behavior.
- 03
Engineering review before quoting: we flag manufacturability issues on your print.
- 04
Consistent edge preparation for predictable tool life in long unattended cycles.
Custom tooling in 3 steps
- 1
Send your drawings
2D/3D files, material and machine details.
- 2
Engineering review
Our engineers confirm geometry, grade and coating approach.
- 3
Quote & build
Priced proposal, then production to your print.
Have an aerospace print that needs a custom tool?
Send us the drawing. We'll review it and come back with tooling built for the alloy, not adapted to it.